Shielded, universal, high performance sewer repair couplings designed for the repair of most types and sizes of sewer/drainage pipes. One coupling per nominal diameter joins Clay, Ductile Iron, Asbestos Cement, Cast Iron and Plastic. For non-pressure, gravity flow applications only. Recommended for underground installations. Multiple sizes from 4" to 16".
COMPONENTS:
Shield/Clamps: Corrosion Resistant AISI 304 Series Stainless Steel Tension Bands with Click-Lock Clamping System
Securing Cage: High Impact Polymide (Nylon)
Gasket: Injection Molded EPDM Rubber
LEGEND: Clay (CL) Ductile Iron (DI) Asbestos Cement (AC) Cast Iron (CI) Plastic (PL) Concrete (CONC)
AISI 304 series stainless steel click-lock clamping system and high impact polymide (nylon) securing cage ensure shear load stabilization and a precision-fit on any pipe. Watertight, leakproof seal resists infiltration and exfiltration.
ANTICORROSIVE
AISI 304 series stainless steel components resist corrosion in marine applications, poorly aerated/moist soils, contaminated ground conditions (e.g. industrial fill sites), and chloride, sulfates or bicarbonates in ground water.
DURABLE
EPDM synthetic rubber sealing gasket resists ultraviolet rays, ozone, fungus growth, natural soil erosive properties, and normal sewer gases.
RESILIENT
EPDM rubber permits a substantial degree of distortion without change in basic physical resistance. More pliable and easier to install in cold weather applications than elastomeric PVC gaskets.
LOAD BEARING
AISI 304 series stainless steel click-lock clamping system and high impact polymide (nylon) securing cage control load bearing between coupling and pipe surface, opposing shear forces and deflection, while maintaining pipe alignment and flexibility.
CUSTOM FIT
Internal pipe stop for precise installation, reduces noise and vibration.
PRE-SET CALIBRATION
Installs with a pre-set cordless drill calibrated to 80 in/lbs.
LEAKPROOF
ANTICORROSIVE
DURABLE
RESILIENT
LOAD BEARING
CUSTOM FIT
PRE-SET CALIBRATION
MAX Series
A-PIPE OD
B-PIPE OD
C-DEPTH OF SOCKET
MAX JOINT DEFLECTION ANGLE
WEIGHT
MAX Coupling OD Range min
MAX Coupling OD Range max
Larger Pipe ID min
Larger Pipe ID max
Smaller Pipe ID min
Smaller Pipe ID max
Sewer Main Wall Thickness
Lateral Pipe min
Lateral Pipe max
Core Drilling min
Sewer Main Core Break min
Sewer Main Core Break max
Foam Qty Required
DIM. A
DIM B
DIM C
DIM D
DIM E
DIM F
Weight
Pressure Resistance
GG Part
Part
4.13
5.56
MAX 4
19200
4.21
5.90
MAX 4 Oversize
19203
5.30
6.50
MAX 5
19205
6.27
7.75
MAX 6
19210
6.27
8.10
MAX 6 Oversize
19211
7.20
8.80
MAX 7
19213
8.40
10.15
MAX 8
19215
9.63
11.13
MAX 9
19216
10.50
12.68
MAX 10
19220
12.50
15.00
MAX 12
19225
13.00
15.75
MAX 13
19230
16.34
19.10
MAX 16
19245
MAX Series
GG Part
Part
Description
Case Qty.
Case Wt.
MAX 4
19200
4" CL/DI/AC/CI/PL to 4" CL/DI/AC/CI/PL
15
35.00 lbs
MAX 4 Oversize
19203
4" CL/DI/AC/CI/PL to 4" CL/DI/AC/CI/PL
12
33.00 lbs
MAX 5
19205
5" CL/DI/AC/CI/PL to 5" CL/DI/AC/CI/PL
12
37.00 lbs
MAX 6
19210
6" CL/DI/AC/CI/PL to 6" CL/DI/AC/CI/PL
12
45.00 lbs
MAX 6 Oversize
19211
6" CL/DI/AC/CI/PL to 6" CL/DI/AC/CI/PL
12
60.00 lbs
MAX 7
19213
6" CL/CONC or 8" CI/PL to Same
8
47.00 lbs
MAX 8
19215
8" CL/DI/AC/CI/PL to 8" CL/DI/AC/CI/PL
8
49.00 lbs
MAX 9
19216
8" CL/CONC or 10" DI/AC/CI/PL to Same
4
32.00 lbs
MAX 10
19220
10" CL/DI/AC/CI/PL to 10" CL/DI/AC/CI/PL
6
44.00 lbs
MAX 12
19225
12" CL/DI/AC/CI/PL to 12" CL/DI/AC/CI/PL
5
52.00 lbs
MAX 13
19230
12" CL/AC/DI/CONC or 14" DI/AC/PL or 15" PL to Same