Shielded, universal, transition couplings designed to connect most types of gravity flow, non-pressure sanitary and drain, waste and vent (DWV) pipes. One coupling per nominal diameter joins Steel, ABS, SCH 40, SDR 35, Cast Iron, Extra Heavy Cast Iron, Asbestos Cement, Stainless Steel, Copper, Duriron®, Ductile Iron and Clay . For non-pressure, sanitary and DWV applications only.
Recommended for above and below ground installations. Available in sizes 2" to 4".
COMPONENTS:
Shield/Clamps: Corrosion Resistant AISI 304 Series Stainless Steel components
Securing Cage: High Impact Polymide (Nylon)
Gasket: Injection Molded EPDM Rubber
LEGEND: Steel (ST) SCH 40 Plastic (PL) SDR 35 Plastic (TWP) Cast Iron (CI) Extra Heavy Cast Iron (XHCI) Asbestos Cement (AC) Stainless Steel (SS) Copper (K) Ductile Iron (DI) Clay (CL)
AISI 304 series stainless steel components and high impact polymide (nylon) securing cage provide sufficient band load to ensure a watertight, leakproof seal that is resistant to both infiltration and exfiltration.
ANTICORROSIVE
AISI 304 series stainless steel components provide highly effective corrosion resistance in a variety of environments; such as marine applications, poorly aerated or moist soils, contaminated ground conditions (particularly industrial fill sites), and where the ground water contains chloride, sulfates or bicarbonates.
DURABLE
Molded rubber gasket is strong, durable and resilient to ultraviolet rays, ozone, fungus growth, natural soil erosive properties, and normal sewer gases.
RESILIENT
EPDM rubber permits a substantial degree of distortion without change in basic physical resistance. More pliable and easier to install in cold weather applications than elastomeric PVC gaskets.
LOAD BEARING
Coupling provides for superior load bearing control between the coupling and pipe surface. The coupling's rugged construction provides excellent sealing properties, and the stainless steel band plus secruing cage offers excellent resistance to shear forces and helps with alignment, while maintaining flexibility.
CUSTOM FIT
Internal pipe stop for precise installation, reduces noise and vibration.
PRE-SET CALIBRATION
Installs with a pre-set cordless drill calibrated to 80 in/lbs minimum torque for the 4", and 60 in/lbs. minimum torque for the 2" & 3", to accomodate the AISI 305 series stainless steel ⁵/₁₆" hex head screw.
LEAKPROOF
ANTICORROSIVE
DURABLE
RESILIENT
LOAD BEARING
CUSTOM FIT
PRE-SET CALIBRATION
MAX DWV Series
A-PIPE OD
B-PIPE OD
C-DEPTH OF SOCKET
MAX JOINT DEFLECTION ANGLE
WEIGHT
MAX Coupling OD Range min
MAX Coupling OD Range max
Larger Pipe ID min
Larger Pipe ID max
Smaller Pipe ID min
Smaller Pipe ID max
Sewer Main Wall Thickness
Lateral Pipe min
Lateral Pipe max
Core Drilling min
Sewer Main Core Break min
Sewer Main Core Break max
Foam Qty Required
DIM. A
DIM B
DIM C
DIM D
DIM E
DIM F
Weight
Pressure Resistance
GG Part
Part
1.63
2.50
MAX DWV 2
19300
3.00
4.13
MAX DWV 3
19305
4.00
5.56
MAX DWV 4
19310
MAX DWV Series
GG Part
Part
Description
Case Qty.
Case Wt.
MAX DWV 2
19300
2" ST/ABS/PL/CI/K/TWP/SS/XHCI/DURIRON®/DI/AC/CL to Same
64
49.00 lbs
MAX DWV 3
19305
3" ST/ABS/PL/CI/K/TWP/SS/XHCI/DURIRON®/DI/AC/CL to Same
36
35.00 lbs
MAX DWV 4
19310
4" ST/ABS/PL/CI/K/TWP/SS/XHCI/DURIRON®/DI/AC/CL to Same