MAXADAPTOR® DWV Couplings

Shielded, universal, transition couplings designed to connect most types of gravity flow, non-pressure sanitary and drain, waste and vent (DWV) pipes. One coupling per nominal diameter joins Steel, ABS, SCH 40, SDR 35, Cast Iron, Extra Heavy Cast Iron, Asbestos Cement, Stainless Steel, Copper, Duriron®, Ductile Iron and Clay . For non-pressure, sanitary and DWV applications only.

Recommended for above and below ground installations. Available in sizes 2" to 4".

COMPONENTS:

  • Shield/Clamps: Corrosion Resistant AISI 304 Series Stainless Steel components
  • Securing Cage: High Impact Polymide (Nylon)
  • Gasket: Injection Molded EPDM Rubber

LEGEND: Steel (ST) SCH 40 Plastic (PL) SDR 35 Plastic (TWP) Cast Iron (CI) Extra Heavy Cast Iron (XHCI) Asbestos Cement (AC) Stainless Steel (SS) Copper (K) Ductile Iron (DI) Clay (CL)

MAXADAPTOR® DWV & MAX 4 Oversize Installation Instructions

Download

ASTM C1173-18 View
IAPMO File 4224 Listed View
CSA CLASS 7021-02 View
MAXADAPTOR® DWV Coupling SubmittalView
MAXADAPTOR DWV TrifoldView
Maxadaptor DWV2
LEAKPROOF

AISI 304 series stainless steel components and high impact polymide (nylon) securing cage provide sufficient band load to ensure a watertight, leakproof seal that is resistant to both infiltration and exfiltration.

ANTICORROSIVE

AISI 304 series stainless steel components provide highly effective corrosion resistance in a variety of environments; such as marine applications, poorly aerated or moist soils, contaminated ground conditions (particularly industrial fill sites), and where the ground water contains chloride, sulfates or bicarbonates.

DURABLE

Molded rubber gasket is strong, durable and resilient to ultraviolet rays, ozone, fungus growth, natural soil erosive properties, and normal sewer gases.

RESILIENT

EPDM rubber permits a substantial degree of distortion without change in basic physical resistance. More pliable and easier to install in cold weather applications than elastomeric PVC gaskets.

LOAD BEARING

Coupling provides for superior load bearing control between the coupling and pipe surface. The coupling's rugged construction provides excellent sealing properties, and the stainless steel band plus secruing cage offers excellent resistance to shear forces and helps with alignment, while maintaining flexibility.

CUSTOM FIT

Internal pipe stop for precise installation, reduces noise and vibration.

PRE-SET CALIBRATION

Installs with a pre-set cordless drill calibrated to 80 in/lbs minimum torque for the 4", and 60 in/lbs. minimum torque for the 2" & 3", to accomodate the AISI 305 series stainless steel ⁵/₁₆" hex head screw.

  1. LEAKPROOF
  2. ANTICORROSIVE
  3. DURABLE
  4. RESILIENT
  5. LOAD BEARING
  6. CUSTOM FIT
  7. PRE-SET CALIBRATION

MAX DWV Series

A-PIPE OD B-PIPE OD C-DEPTH OF SOCKET MAX JOINT DEFLECTION ANGLE WEIGHT MAX Coupling OD Range min MAX Coupling OD Range max Larger Pipe ID min Larger Pipe ID max Smaller Pipe ID min Smaller Pipe ID max Sewer Main Wall Thickness Lateral Pipe min Lateral Pipe max Core Drilling min Sewer Main Core Break min Sewer Main Core Break max Foam Qty Required DIM. A DIM B DIM C DIM D DIM E DIM F Weight Pressure Resistance GG Part Part
1.632.50MAX DWV 219300
3.004.13MAX DWV 319305
4.005.56MAX DWV 419310

MAX DWV Series

GG PartPartDescriptionCase Qty.Case Wt.
MAX DWV 2193002" ST/ABS/PL/CI/K/TWP/SS/XHCI/DURIRON®/DI/AC/CL to Same6449.00 lbs
MAX DWV 3193053" ST/ABS/PL/CI/K/TWP/SS/XHCI/DURIRON®/DI/AC/CL to Same3635.00 lbs
MAX DWV 4193104" ST/ABS/PL/CI/K/TWP/SS/XHCI/DURIRON®/DI/AC/CL to Same1532.00 lbs