RingGap™ Seals

A new and innovative universal annular gap pressing system that enables a quick, precise, and construction site-friendly pipe penetration on existing structures. Almost all media pipes - such as sewage, cable protection, water, or gas pipes - can be safely routed or connected through buildings, ceilings, walls, shafts, manholes, pipes, or floors and permanently sealed against water or gas up to 20 PSI. Available in pre-fabricated sizes 1.90" to 3.50", and custom fabricated sizes 4" to 12".

COMPONENTS:

  • Gap Pressing System: Polyamide
  • Collar: Double-layered EPDM rubber
  • Bushings: EPDM rubber

LEGEND:  CI - Cast Iron  /  PL - Plastic  /  ST - Steel  /  K - Copper  /  XHCI - Extra Heavy Cast Iron  /  DI - Ductile Iron

RingGap™ Seal_Installation Instructions

Download

RingGap™ Seal_Trifold BrochureView
RingGap Seal
LOAD BEARING

Pipes are not only sealed but also secure against any thrust or shear forces

ADAPTABLE

Accommodates ovalized & non-circular pipes
• Deflection is possible up to 3°

EASY

Installed quickly & safely

SECURE FIT

Stop lugs ensure precise assembly & guarantee secure fit

ANTICORROSIVE

No corrosive parts
• No special tools
• No hardware decisions: Carbon vs. Stainless?

  1. LOAD BEARING
  2. ADAPTABLE
  3. EASY
  4. SECURE FIT
  5. ANTICORROSIVE

RGS Series

A-PIPE OD B-PIPE OD C-DEPTH OF SOCKET MAX JOINT DEFLECTION ANGLE WEIGHT MAX Coupling OD Range min MAX Coupling OD Range max Larger Pipe ID min Larger Pipe ID max Smaller Pipe ID min Smaller Pipe ID max Sewer Main Wall Thickness Lateral Pipe min Lateral Pipe max Core Drilling min Sewer Main Core Break min Sewer Main Core Break max Foam Qty Required DIM. A DIM B DIM C DIM D DIM E DIM F Weight Pressure Resistance Pipe O.D. 2 Bushings (TWP) Pipe O.D. 1 Bushing (SCH 40) Pipe O.D. No Bushings (DI) Inside Core Drilling I.D. Installation Depth (Min) GG Part Part
1.90"4.00"2.50"RGS 1.90/4.00
2.13"4.00"2.50"RGS 2.13/4.00
2.35"4.00"2.50"RGS 2.35/4.00
2.38"4.00"2.50"RGS 2.38/4.00
2.88"5.00"2.50"RGS 2.88/5.00
3.13"5.00"2.50"RGS 3.13/5.00
3.25"5.00"2.50"RGS 3.25/5.00
3.35"5.00"2.50"RGS 3.35/5.00
3.50"5.00"2.50"RGS 3.50/5.00

RGS Series

GG PartPartDescriptionCase Qty.Case Wt.
RGS 1.90/4.001.50" SCH 40 PL/ABS/ST/CI11.05 lbs
RGS 2.13/4.002" K1 lbs
RGS 2.35/4.002" CI10.80 lbs
RGS 2.38/4.002" SCH 40 PL/ABS/ST/XHCI10.80 lbs
RGS 2.88/5.002.50" SCH 40 PL/ST11.40 lbs
RGS 3.13/5.003" K1 lbs
RGS 3.25/5.003" SDR 35 PL1 lbs
RGS 3.35/5.003" CI11.15 lbs
RGS 3.50/5.003" SCH 40 PL/ABS/ST/XHCI11.00 lbs